NISSAN 350Z Z33 2002-ON Cobra Springs
Share with a friend on social media
Couldn't load pickup availability
Cobra Performance Springs
Sold as a pair
Please use drop box to select options
**Occasionally these springs need made to order which is a 2-4 week turnaround**
Cobra Springs are designed and manufactured to demanding standards using high quality micro-alloy spring steel. They are hot wound on state of the art coiling machines, oil hardened, electronically tempered, shot peened, scragged and load tested for maximum reliability.
We use the following steps to produce our high performance springs, which are all hand made locally in Christchurch for optimum quality and finishing.
HOT WINDING
Spring steel wire is heated to nearly 1000ºC before being hot wound. Hot winding reduces stress in the steel during coiling as opposed to cold winding.
HARDENING
The springs are hardened in a special oil quenching bath then they are transferred to an electronic furnace. A precise hardness setting is required to prevent the spring from cracking or sagging when in use.
SHOTPEENING
The spring is shot peened to relieve surface stress. Thousands of tiny steel balls are fired at the springs to relieve the stresses built up during winding and tempering.
SCRAGGING
The spring is then scragged or 'preset'. The procedure twists the steel to its limits - never again will it be twisted to this extent. Upon completion the height of the spring is set.
POWDER COATING
The final process, powder coating, gives a high quality protective coating to the spring.